BAAM.Tech | Support
Search
Close this search box.

DJI Matrice 30 Series FAQs

Aircraft #

The Matrice 30 series includes two versions: M30 (its gimbal and camera have three sensors: wide-angle camera, zoom camera, laser range finder) and M30T (its gimbal and camera have four sensors: wide-angle camera, zoom camera, laser range finder, thermal imaging camera).

The DJI Dock is compatible with the M30 (Dock version) and the M30T (Dock version), but not regular M30 series drones. This is because the M30 (Dock version) has slight differences in its body to be compatible with the DJI Dock. When you purchase the DJI Dock, it includes the M30 (Dock version) or the M30T (Dock version).

Yes it is supported, M30 series aircraft comes with frame arm lock function. If the arm is not unfolded properly, the app will give a warning to prohibit takeoff.

Gimbal and Camera #

Gimbal and camera are fixed cannot be replaced.

Single Shot, High-res Grid Photo, Timed Shot, Panorama, and Smart Low-light Photo

Flip the gimbal up by 90° to lock its tilt.
Lock the tilt to better protect the camera lens and prevent scratches during transportation or storage of the aircraft. The gimbal can be quickly and easily unlocked when arriving at the operation site, greatly reducing preparation time for the operation.

Transmission #

The M30 series supports both OcuSync (O3) and 4G image transmission.
Note: 4G image transmission is not available in some countries/regions.

Software #

Connect the aircraft to a computer and update the firmware of the aircraft, remote controller (RC), and D-RTK 2 Mobile Station by using DJI Assistant 2 For Enterprise.
Use DJI Pilot 2.0 App to update the firmware of the aircraft, remote controller (RC), and BS30 Intelligent Battery Station.
Download the firmware on DJI website(link), and insert the SD card with the firmware package into the aircraft for offline update.
See the User Manual for more information.

Yes, dual control is supported.

DJI Pilot 2.0 (For Android) and other software developed by using MSDK.

Application #

Supports Payload SDK and Mobile SDK. The Payload SDK interface on top of M30 series aircraft integrates the functions of Onboard SDK.
Please contact support@baam.tech for further technical support.

Not supported. TheM30 series is not designed for aerial surveying. Users can plan a flight path and capture photos in the aerial FPV mode of DJI Pilot 2.0 App, but the model’s accuracy is not guaranteed.

Yes. Upgrade the firmware of D-RTK 2 Mobile Station to the latest version to use with the M30 series.

Remote Controller #

Using DJI 4G Dongle for transmission is supported.
Note: 4G image transmission is not available in some countries/regions.

Battery #

With a BS30 Intelligent Battery Station, it takes about 50 minutes to fully charge the two TB30 Intelligent Flight Batteries, about 40 minutes to charge up to 90%, and only about 30 minutes to charge up from 20% to 90%.

TB30 Intelligent Flight Batteries can work in operating environments with temperatures ranging from -20°C (-4°F) to 50°C (122°F). Battery life will be shortened when used in low temperature environments. Please plan your flight times accordingly. For optimal battery performance, it’s recommended to keep the battery temperature above 18°C (64°F), or heat the battery to 18°C (64°F) with its self-heating function (a takeoff limit will be triggered if the battery temperature is below 10°C (50°F)).

TB30 Intelligent Flight Battery’s power level is 131.6 watts. Please comply with local airline regulations when planning to fly with batteries.

Long-term storage of a lithium battery at full charge will significantly shorten its battery life. In order to ensure safe storage and extend the battery life, a fully charged battery will activate its auto-discharging function to discharge itself to a level of about 50%. During the auto-discharging process, it will release some heat, which is normal.

The capacity of the TB60 Intelligent Flight Battery is 274 Wh and cannot be carried on board airplanes according to airline regulations.

When the battery is stored for a long time, to ensure storage safety and to extend battery life, the battery will automatically start self-discharging to about 65%. It’s normal for the battery to feel slightly warm during this process.

The M300 RTK can take off if the voltage discrepancy of the two batteries is within 0.7 V. If it is unable to take off, the app will inform you that “the power discrepancy in the two batteries is too large”.

Other #

The M30 series includes two versions: the Chinese version and the International version. Please check BAAM.Tech Sales (sales@baam.tech) about the availability of the product.

Updated on May 1, 2023
What are your feelings

Get Support

Start your support ticket by completing the form below.